Skip to content

Ventis - VB00017 - Ventis HE275CF ZC Wood Fireplace - Unit

by Ventis
SKU VB00017
Save 16% Save 16%
Original price $4,526.00
Original price $4,526.00 - Original price $4,526.00
Original price $4,526.00
Current price $3,818.00
$3,818.00 - $3,818.00
Current price $3,818.00
+ FREE SHIPPING | Ships in 2-10 Business Days | No Sales Tax* | Found it lower?

Need help? Our professionals are available to assist you.
  • Description
  • Ventis - VB00017 - Ventis HE275CF ZC Wood Fireplace - Unit

    Ventis HE275CF Zero Clearance Wood Burning Fireplace is built for heating and EPA certified. It has a 2.5 cubic ft firebox that can handle up to a 20-Inch log and has a maximum burn time of up to 8 hours for one load of wood. It produces 80,000 BTUs to heat up to 2,200 square feet. The Ventis HE275CF fireplace requires 6" chimney venting and includes a 6" Rock-Vent Anchor Plate to start the chimney pipe off the top of the fireplace.

    It uses a hot air gravity kit to maximize the heating output of the fireplace. The heat from the top of the fireplace rises up two pipes attached to the fireplace and is released through a grill on the wall above the fireplace. This hot air gravity kit is available in traditional and modern styles.

    • Designed mainly for heating
    • Large contemporary fireplace with single door
    • EPA 2020 certified
    • Non-catalytic combustion technology
    • Installation authorized on the Island of Montreal
    • Firestop made of high density insulation board
    • Minimalist Ventis distinctive louver
    • Molded refractory stones
    • 6" Ventis stainless steel anchor plate included
    • Fresh air intake adapter and andiron included

    Required Option: 

    • Choose one Hot Air Kit to complete this unit. Not Included, Sold Separately.
    • Hot Air Gravity Kit Traditional (AC01375K) or Modern (AC01389K)

    Appliance Performance

    Fuel type Dry cordwood (16" recommended)
    Recommended heating area 750 - 2,200 ft²
    Overall firebox volume 2.5 ft³
    Maximum burn time 8 Hours
    EPA loading volume 1.69 ft³
    Maximum heat output-dry cordwood 80,000 BTU/h
    Minimum overall heat output rate 14,200 BTU/h (4.16 kW)
    Maximum overall heat output rate 48,200 BTU/h (14.13 kW)
    Average efficiency-dry cordwood (HHV) 65.7 %
    Average efficiency-dry cordwood (LHV) 73 %
    Optimum efficiency 74 %
    Optimum heat transfer efficiency 71 %
    Average particulate emission rate 1.14 g/h
    Average CO 53 g/h
    • Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
    • Optimum overall efficiency at a specific burn rate (LHV).
    • This appliance is officially tested and certified by an independent agency.
    • The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
    • As measured per CSA B415.1-10 stack loss method.
    • Higher Heating Value of the fuel.
    • Lower Heating Value of the fuel.
    • The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
    • Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
    • Carbon monoxyde.

    General Features

    Premium quality blower included (CFM) Optional
    Certified according to applicable standards CAN/USA accredited laboratory
    Flue outlet diameter 6"
    Recommended chimney diameter 6"
    Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
    Minimum chimney height 15"
    Overall dimension (Width) 36 3/4"
    Overall dimension (Height) 40 5/8"
    Overall dimension (Depth) 27 1/4"
    Door type Single, glass with cast iron frame
    Door opening size (Width) 25 3/8"
    Door opening size (Height) 10 1/2"
    Glass type Ceramic glass
    Glass surface - W x H 24" x 10 5/8"
    Firebox size (Width) 20 3/4"
    Firebox size (Height) 12 1/8"
    Firebox size (Depth) 12 7/8"
    Maximum log length 20"
    Log positioning Loading over width
    High-efficiency certified appliance Yes, EPA 2020 approved
    Canadian Standard (safety) ULC S610
    USA Standard (safety) UL 127
    Combustion technology Non-catalytic
    Baffle type High density insulation board
    Stainless-steel secondary-air system Yes
    USA Standard (emissions) EPA
    Canadian Standard (emissions) CSA B415.1-10
    Shipping weight 495 lb (225 kg)
  • Videos


Have a Question?

Be the first to ask a question about this.

Ask a Question